Lift and to open the door.
Remove both ingredient packages.
Check their expiry dates (printed) and opening date (written).
Clean the interior of the refrigerator with a moist cloth.
Take a thawed liquid pack and read the instructions on the pack.
Shake the pack at least 10 times.
Write the current date on the pack.
Tear open the dosing tube opening, and unfold the dosing tube.
Check that the dosing tube is positioned straight and that the coloured ring on the tube covers the corresponding circle on the pack.
Open the dosing tube by turning it 90 degrees clockwise, check if the tube starts filling itself.
Place the ingredient packages into the refrigerator.
Close the door.
Activate the hidden globe icon in the bottom left corner of the touchscreen and press it to open the operator menu.
Open the Menu, then press ‘Flush’ and follow the instructions on the touchscreen.
Place a 3-litre container on the drip tray.
WARNING!
Hot water will flow into the rinsing container. When ready, press ‘ENTER’ to continue.
Carefully remove and empty the rinsing container.
Disassemble the drip tray. Clean the parts with clean water and a brush.
Reassemble the drip tray and place it back.
Open the door and push the ‘stand by’-button to disable the touchscreen. Then close the door.
Clean the exterior of the machine with a moist cloth.
Never spray directly onto the machine.
Open the door and push the ‘stand by’-button again, to enable the touchscreen. Then close the door.