Cafitesse Omni

Daily cleaning

Wear protective equipment (gloves & protective glasses), if you are using cleaning agents.

Wash you hands thoroughly before opening a new pack of ingredients.

Step 1

 

Insert the key in the keyhole and turn it 90 degrees clockwise to open the door. 

 

Go to next step >

 

Step 2

 

Remove the lower drip tray and the upper plate carefully, to avoid spilling drain water that can be inside, and empty it.

 

Go to next step >

Step 3

 

Remove upper plate, disassemble the drip tray, and clean all parts with a brush under running water. 

 

Go to next step >

Step 4

 

Unscrew the knurl / knob that fixes the external drip tray.

Remove the drip tray, disassemble, and clean all parts with a brush under running water.

 

Go to next step >

Step 5

 

Unlock and open the refrigerator door. 

Open the hatch above the refrigerator, and the lid of the refrigerator, and interlock them.

 

Go to next step >

Step 6

 

Remove both packs and check the content, expiry and opening dates. 

Clean the inside of the refrigerator with a clean, moist wipe. 

 

Go to next step >

Step 7

 

Pull up all the canister outlets to close them. 

Lift each canister up, and pull out of its marks to remove them.  

Place all canisters on a table with the outlet over the edge of the table 

If necessary, top up the ingredients in the canisters. 

 

Go to next step >

Step 8

 

Use a damp cloth to clean the canister table. 

Use a damp cloth to clean the outside of the filled canisters  

Place each canisters back onto the canister table, with its positioning rails in the slot

 

Go to next step >

Step 9

 

Pull out the bottom plate, clean with a moist wipe, and push it back. 

Clean the plate that holds the drip tray in place with a moist wipe. 

Place the drip tray back.

 

Go to next step >

Step 10

 

Clean the dispensing compartment interior with a moist wipe.

 Place the external drip tray back.

 

Go to next step >

Step 11

 

When a new package is needed, take a thawed liquid pack and read the instructions on the pack.

Shake the pack at least 10 times. 

Write the current date on the pack. 

 

Go to next step >

Step 12

 

Tear open the dosing tube opening, and unfold the dosing tube  

Check that the dosing tube is positioned straight and that the coloured ring on the tube covers the corresponding circle on the pack 

Open the dosing tube by turning it 90 degrees clockwise, check if the tube starts filling itself 

 

Go to next step >

Step 13

 

Place the ingredients packs in the refrigerator. 

Release the top lid refrigerator from the cabinet top hatch, and close both. 

Close the refrigerator door.

 

Go to next step >

Step 14

 

Insert the yellow key and turn 90 degrees.  

WARNING! This will reactivate the functions that, by opening the door, were disconnected for safety reasons. Do not open covers with these symbols: ‘WARNING’ and ‘ELECTRIC SHOCK HAZARD’. 

 On the touchscreen, enter your pin code.

 

Go to next step >

Step 15

 

Place the rinsing container on the drip tray 

On the touchscreen, open ‘Favorites’ menu in the bottom of the screen, and choose ‘Filling’, then tick ‘all containers are full’ 

 

Go to next step >

Step 16

 

Again, open ‘Favourites’ menu, now choose ‘Cleaning’, then tick ‘complete cleaning’ 

 

Go to next step >

Step 17

 

WARNING! 

Hot water will run out of both outlets

 

Go to next step >

Step 18

 

On the touchscreen, press ‘Back’ icon to return to the home/start screen.

Empty and rinse the rinsing container.

 

Go to next step >

Step 19

 

Clean the exterior of the cabinet with a wet wipe.